Blue White Chem-Pro Diaphragm Pumps | C2F241XEB | C2F241XED | C2F241XVA | C2F241XVB | C2F241XVC | C2F241XVD | C2F242PVA
» » C2 Chem-Pro Series Pumps
Blue White C2 Chem Pro Diaphragm Series pumps

C2 Series Chem-Pro® Pump

Diaphragm Metering Pump
Where to Buy:
pumpsandinstrumentation
elementsearch

Description :

  • 166 RPM (Max strokes per minute)
  • Variable speed, Smooth motor driven chemical feed
  • Nema 4X washdown / IP 66
  • Back Lit LCD display
  • Priming / Degassing Valve – Built-in
  • Leak Detection – Built-in Diaphragm Failure Detection (DFD)
  • Exclusive Diaflex® Single Layer PVDF diaphragm.

Features :

Benefits of a Diaphragm Pump :

  • Capable of high pressures and high volume outputs.
  • Non-loss motion variable speed DC motor is powerful, quiet and energy efficient

Capabilities :

  • Feed rate resolution 0.1%
  • Output rates to: 15 GPH (55 LPH) and pressures to 175 PSI (12 Bar).

Communication & Interface :

  • SCADA ready 5-30V DC open collector output loop closes while motor is energized.
  • Profibus DPV1, Profinet RT I/O, Industrial Ethernet/IP, Modbus RTU and Modbus TCP available
  • Signal inputs include: 4-20mA, pulse inputs, and Remote start/stop
  • Signal outputs include: Relay (3 amp), open collector, 4-20mA (optional)
  • Large, intuitive control-pad
  • Backlit LCD displays motor speed, input signal values, service and alarm status.
  • Includes Diaphragm Failure Detection (DFD) system.
  • Compatible with Blue-White’s Flow Verification Sensor (FVS) system
  • Alarm relay monitors the DFD system and the FVS system.

Superior Engineered Design :

  • Protective LCD snap-on cover, (UV, in field wear and tear)
  • Large single piece junction box with terminal block connectors inside
  • Large PVDF, Ceramic, TFE/P double ball check valves without metal springs.
  • Priming and degassing valve built into the pump head
  • Exclusive Diaflex™ Single Layer PVDF diaphragm.
  • NEMA 4X (IP66) wash-down, chemically resistant powder coated enclosure.

Patents Pending :

  • Exclusive Diaflex® Single Layer PVDF diaphragm.

Specifications :

  • Maximum Working Pressure*: 175 psig (12 bar)
  • Maximum Fluid Temperature: 130° F (54° C)
  • Ambient Temperature Range: 14 to 115° F (-10 to 46.1° C)
  • Output adjustment Range: 1-100% in 1% increments
  • Turn Down Ratio: 100:1
  • Duty Cycle: Continuous
  • Maximum Viscosity: 1,000 Centipoise
  • Maximum Suction Lift: 15 ft. water (4.5 m water)
  • Enclosure Rating: NEMA 4X/IP66
  • Power Requirements115v, 50/60Hz 1.5 Amp
  • 230v, 50/60Hz 0.7Amp
  • Shipping Weight: 24 lb. (approx.)


  • * Depending on model selection.

Popular Models: