Proportional Feed System | Model PC A-100N Series | PC A-100N Series | Utilizing Paddlewheel Flowmeter | Blue White Pumps | Blue White Pump | Blue And White Pumps
» » Proportional Feed System
Model PC A-100N Series, Proportional Feed System

Model PC A-100N Series

Proportional Feed System | Blue White Pumps
Where to Buy:
pumpsandinstrumentation
elementsearch

Features :

  • The F-2000 digital paddlewheel flowmeter includes circuitry that automatically turns on your metering pump for a preset injection time, from 1 through 999 seconds, per volume of fluid flow measured.
  • The simple relay switch (8A 115/230Vac) can be used to control any electrically operated device such as a metering pump, centrifugal pump, solenoid valve, etc.
  • Maintains a constant chemical injection to water flow ratio regardless of changes in the system flow rate or pressure.
  • Setpoint status icon indicates when chemical is being injected.
  • Total number of injections (batches) is recorded and displayed.
  • When purchased as a Flowmeter & Pump system kit, the system is factory wired and tested for easy installation.
  • Hundreds of Flowmeter and Pump combinations from which to choose.

How To Build System

1. Select your F-2000-PC Flowmeter :

Each F-2000 flowmeter is designed specifically for the intended pipe size and operating flow range. Contact the factory for assistance in specifying your model.

The model F-2000-PC features the following options :

  • Models with flow ranges from .4 to 8000 gallons per minute.
  • Pipe sizes from 3/8" through 12".
  • Pipe fitting styles include :
    • Injection molded Inline units with MPT end connectors. 3/8"–2" pipe.
    • Machined inline units with FPT end connectors and union adapters. 3/8"–2" pipe.
    • Saddle mount units from 1-1/2"–12" pipe.
    • PVC solvent weld tee fittings from 1"–3"
  • Display mounting options include :
    • On-sensor mounting.
    • Remote panel mounting (1/4 DIN opening)
    • Remote pipe or wall mounting.
  • Power options include :
    • 115Vac, 220Vac, 230Vac, 16-24V DC.
  • Calibration unit options :
    • gallons, liters, cubic meters, acre feet, imperial gallons, or custom units.

2. Select your Metering Pump :

Virtually any metering pump can be used for your proportional feed system.

For diaphragm pump applications, we recommend the model C-1500N or C-1100 CHEM-FEED® Diaphragm Pump

For peristaltic pump applications, we recommend the A-100N.

OPTION 1 – C-1500N DIAPHRAGM PUMP :

  • Standard Models feature a quick adjusting, high accuracy mechanical stroke length control allowing you to easily fine tune your system.
  • Superior pump head design.
  • All ball bearing gear motor for smooth, powerful operation.
  • Voltage options 115Vac, 220Vac, 230Vac, 24Vac.
  • Field serviceable.
  • Efficient, dependable design – each unit is factory tested.
  • Can be purchased as the STAR SYSTEM® Tank System.

OPTION 2 – C-1100 DIAPHRAGM PUMP :

  • Standard Models feature a quick adjusting, high accuracy mechanical stroke length control allowing you to easily fine tune your system.
  • Superior pump head design.
  • All ball bearing gear motor for smooth, powerful operation.
  • Voltage options 115V60Hz, 220V50Hz, 230V60Hz, 240V50Hz.
  • Multiple Electronic Controls selections available
  • Efficient, dependable design – each unit is factory tested.
  • Can be Purchased as the STAR III® Tank System.

OPTION 3 – A-100N PERISTALTIC PUMP :

  • Self priming, even against line pressure.
  • No valves in the head to clog or clean.
  • Great for slurries.
  • Tube Failure Detection system (TFD).
  • De-gassing design eliminates gas or air in the pumphead.
  • Output amount is not effected by changes in back pressure.
  • Voltage options 115Vac, 220Vac, 230Vac.
  • Can be purchased as the STAR III® Tank System.